HaiFei GS and GSH series crusher designed to meet the demanding requirements of universal and easily broken recycled materials and designed a strong, heavy-duty crusher. Regardless of injection molded parts of high-quality GS and GSH series crusher outlet material, box, profiles, tubes, film, sheet or large piece of solid body can be broken recycling. Equipment, economic, practical, easy to operate, durable.
¡¡¡¡Crushing different materials, HaiFei can provide a different rotor design, cut three to heavy, semi-closed type and five type from the strong grasp ...¡­

¡¡¡¡The GS GSH series of strong, heavy-duty crusher can solve almost all plastic crusher aspects of the problem. Equipment is economical and practical, safe and convenient operation, high degree of automation.
GS GSH series rotor tool uses the most advanced technology of V-shaped cut. V-shaped cutting technology in the recycling process will be broken material sent to the center of the blade, to avoid the material posted on the sidewall, while also increasing the wear resistance of the sidewalls.
¡¡¡¡Smash the box easy to open, change tools, repair and maintenance safe and convenient to the central line as the boundary is divided into two parts, the upper part of the available mechanical devices (or pneumatic devices, hydraulic devices). Part of the opening of the sieve through the front door bolt fixed and machine.
¡¡¡¡Solid bearing device installed outside of the machine, and is independent of the cutting room to prevent dust and dirt from entering the bearings. Extend machine life while reducing maintenance work. And crushing chamber separate independent bearing this advantage is particularly significant for with water broken.
¡¡¡¡Installed in the non-drive side of the shaft in order to increase the inertia of the rotor, the auxiliary flywheel. The GSH series shaft to extend part of the standard configuration flywheel.
¡¡¡¡All knives, including knife and fixed knife can be set to adjust the machine outside of the fixture is no longer necessary after a difficult machine to adjust the tool process. The tool is made from high quality alloy steel, regrinding several times.
¡¡¡¡This series can be set by adding a removable deflection wedge (the third fixed knife), which can be used to change the feed mouth cross-section and the crusher required cutting a cutting point.


Technical parameters£º
The main components   Tool (using high-quality tool alloy steel), bearings (Luoyang Bearing, heavy-duty bearings)
Conventional models    GS350/500¡¢GS400/600¡¢GS560/700¡¢GS560/1000¡¢GS500/1000
Rotor width    500mm-1600mm£¨0.5Ã×-1.6Ã×£©
Motor Power    22KW-200KW£¨30HP-275HP£©
Fan power     3KW-22KW£¨4HP-30HP£©
Feeder configuration    Can be equipped with automatic feeding conveyor system, easy operation, low labor intensity

The above data is for reference only For more information, welcome inquiries HaiFei the sales department, technical department!
Contact Person: Mr. Lu
Tel£º0512-58536260  13915478358

Copyright © 2011 HAIFEI. All right reserved. TEL:0512-58536260 / FAX:0512-58536260